WiMi 4000

Near zero latency H.264 compression up to 1920x1080p60
WiMi4000 provides wireless HDMI transmitter/receiver solution at the resolution of 1920x1080p60. Hardware-based H.264 compression engine is used for encoding full HD video signals. So, it can deliver full HD (1920 x 1080p60) video at 12 Mbit/s without any degradation of video quality. There is almost zero latency between transmitter (encoder) and receiver (decoder), approximately 80 milliseconds. Low latency is especially important for applications requiring real-time video transmission with the interaction. So, the WiMi4000 can be used for delay sensitive applications, such as PC2TV, PTZ camera or gaming console with the HDTV.

Supports various video connectors: HDMI, DVI, Y/Pb/Pr and PC
Both the WiMi4000T, wireless HDMI transmitter and the WiMi4000R, wireless HDMI receiver have several video and audio interfaces. It supports HDMI and DVI interface with the DVI/HDMI gender. Also, RCA jacks for analog component signals (Y/Pb/Pr) as well as PC monitor out with D-Sub connector up to the 1080p60 resolution. So, it can be used to connect pc to the HDTV without expensive PC/component trans-coder, even though the connectors on PC and HDTV are different each other.

Linear PCM and compressed audio, Dolby digital and DTS
The WiMi4000T and WiMi4000R can transmit all audio formats, such as 44.1khz/48khz 24-bit 2-channel linear PCM and compressed audio, 5.1 channel Dolby digital and DTS. There are two RCA jacks for stereo audio inputs as well as mini stereo phone jack. The WiMi4000R has also mini stereo phone jack for stereo audio output as well as 2 RCA jacks.

Popular wireless: IEEE802.11n with maximum distance of 450 m (1,500 feet) at line of sight (LOS)
The video and audio data from WiMi4000T and WiMi4000R are transmitted and received through the standard IEEE 802.11n wireless LAN. Although the air condition is varying from time to time, it is enough to deliver audio/video data because WiMi4000 series requires typically 10~20 Mbit/s, which is tenth of wireless LAN bandwidth.

Provides One-to-Many Multicasting Capability
It supports one-to-many multicasting function. In Wi-Fi Mode, four receivers can display full HD video simultaneously. In case of PLC modem, maximum 16 receivers can get full HD video from a transmitter at the same time. There is no restriction of the numbers of receiver in Ethernet LAN mode.

Full HD Real-time Streaming Server over Internet (RTSP/RTP/UDP or MPEG-2 TS/UDP)
The WiMi4000T provides RTSP streaming server functionality. So, you can receive full HD video with VLC media player in the PC as well as the receiver, WiMi4000R, simultaneously. Of course, the PC can be connected to the streaming server, WiMi4000T, wirelessly through the 802.11n WiFi.

The WiMi4000T also can be used as an real-time MPEG-2 TS/UDP streaming server for IPTV network. So, you can receive full HD video with a H/W based H.264 decoder or VLC player in PC. This low cost IPTV encoder solution will help to deliver full HD video to existing DiD TV or digital signage display. Of course, the PC can be connected to the streaming server, WiMi4000T, wirelessly through the 802.11n WiFi.

Full Duplex Virtual Serial Cable (VSC) Function and Telnet Command Line Interface (CLI) for online control
The WiMi6000 provides full duplex virtual serial cable function with TTL level signal interface for online commands. Also, command line interface via Telnet server can be used for online control at remote location via Internet.

Click Here to Download the Product Sheet.

WiMi 6400

Small Form Factor High-end Solution of the Ethernet full HD with 30 Mbit/s of Encoding Rate
The WiMi6400T and WiMi6400R provides high quality Full HD encoding/decoding function with low latency of 40ms for encoding and decoding, each. It supports wide range of encoding rate from 1Mbps ~ 30Mbps for the high quality video for video broadcasting.

Full HD Real-time Streaming Server over Internet (RTSP/RTP/UDP or MPEG-2 TS/UDP)
The WiMi6400T provides RTSP streaming server functionality. So, you can receive full HD video with VLC media player in the PC as well as the receiver, WiMi6400R, simultaneously.

The WiMi6400T also can be used as an real-time MPEG-2 TS/UDP streaming server with linear PCM audio for IPTV network. So, you can receive full HD video with a H/W based H.264 decoder or VLC player in PC. This low cost IPTV encoder solution will help to deliver full HD video to existing DiD TV or digital signage display.

Provides One-to-Many Multicasting Capability
It supports one-to-many multicasting function over Ethernet LAN or IP network. So, there is no restriction on the numbers of receiver in Ethernet LAN or IP networks.

Full Duplex Virtual Serial Cable (VSC) Function and Telnet Command Line Interface (CLI) for online control
The WiMi6000 provides full duplex virtual serial cable function with RS232 interface for online commands. Also, command line interface via Telnet server can be used for online control at remote location via Internet.

Click Here to Download the Product Sheet.

WiMi 5000

Zero ( < 20ms) latency of H.264 compression up to 1920x1080p60
WiMi5000 series provides wireless HDMI transmitter/receiver solution at the resolution of 1920x1080p60. Hardware-based H.264 compression engine is used for encoding full HD video signals. So, it can deliver full HD (1920 x 1080p60) video at 6 ~ 50 Mbit/s without any degradation of video quality. There is almost zero latency between transmitter (encoder) and receiver (decoder), approximately within 20 milliseconds. Super low latency is especially important for applications requiring real-time video transmission with the interaction. So, the WiMi5100/5500 can be used for delay sensitive applications, such as Remote PC, IP KVM, PC2TV or gaming console with the HDTV.

Linear PCM and compressed audio, Dolby digital and DTS
The WiMi5000 series transmitter and receiver can transmit all audio formats, such as uncompressed audio with sampling rates of 44.1kHz, 48kHz, 96kHz and 192kHz(16-bits only) at 16-bits and 24-bits, and compressed audio, 7.1 channel Dolby Digital Plus and DTS-HD of 6Mbps.

Wireless: Maximum radio coverage of 150m (500 ft) at line of sight
The video and audio data from WiMi5000 series transmitter and receiver are transmitted and received through the standard IEEE 802.11n wireless LAN. Although the air condition is varying from time to time, it is enough to deliver audio/video data because WiMi5000 series requires typically 6~50 Mbit/s, which is tenth of wireless LAN bandwidth.

Wire-line: Ethernet/IP (WiMi5300T/R)
The WiMi5300 supports Ethernet wireline including public IP network at maximum 50~60 Mbps without any degradation of video quality. This will replace high cost optical transmitter used for full HD video transmission.

Provides one-to-many multicasting capability (option)
It supports one-to-many multicasting function. In Wi-Fi Mode, four receivers can display full HD video simultaneously.

Click Here to Download the Product Sheet.

All-in-One Matrix + Switcher



System Specification.

HD Character Management​

Low Heat, High Performance Mini-Converter

BAT-Series

Our innovative BAT Series line of mini converters offer superior signal quality with the lowest SDI jitter. The BAT Series is a versatile and feature-packed solution for your project and budget requirements. Based on your conversion needs, there are four models to choose from supporting a full range of SDI (3G/HD/SD), HDMI and Analog Composite/Component options.

BAT Series Option

HDMI to HD/SD/SDI (BAT-3HS) / HD/SD/SDI to HDMI (BAT-3SH)

Analogue to HD/SD/SDI (BAT-AS) / HD/SD/SDI to Analogue (BAT-SA) / SDI Distributor 6-Outputs (BAT-SD)

BAT-3HS (HDMI to HD-SDI)

BAT-3HS KEY FEATURES:

Auto detection mode (3G/HD/SD)
Re-clocked loop-through 3G/HD/SD-SDI output [BNC 75 ohm]
HDMI v1.3 compliant
Supports 8 audio channels (4 stereo pairs) - 48kHz sample rate
Additional analog stereo audio output (Left RCA : White, Right RCA : Red)
Selectable luminance range(0~255/16~235) by DIP switch
Selectable HD/SD color space conversion by DIP switch


Supported Video Formats:

720(1440) x 480i @ 59.94/60, 720(1440) x 576i @ 50
1280 x 720p @ 50, 1280 x 720p @ 59.94/60
1920 x 1080i @ 50, 1920 x 1080i @ 59.94/60
1920 x 1080p @ 23.94/24, 1920 x 1080p @ 25, 1920 x 1080p @ 29.97/30
1920 x 1080p @ 50, 1920 x 1080p @ 59.94/60

Video Inputs:

HDMI with embedded audio & auto mute when DVI input

Video Outputs:

SMPTE-259/272/274/292/296/299/424/425 3G/HD/SD-SDI, 2 x BNC

Audio Outputs:

- Supports 8 audio channels (4 stereo pairs)
- when the input audio sample rate is 48kHz
- Supports 2 audio channels (1 stereo pair)
- Auto detection of the input audio sample rate

BAT-3SH (HD-SDI to HDMI)

BAT-3SH KEY FEATURES:

Auto detection mode (3G/HD/SD)
Re-clocked loop-through 3G/HD/SD-SDI output [BNC 75 ohm]
HDMI v1.3 compliant
Supports 8 audio channels (4 stereo pairs) - 48kHz sample rate
Additional analog stereo audio output (Left RCA : White, Right RCA : Red)
Selectable luminance range(0~255/16~235) by DIP switch
Selectable HD/SD color space conversion by DIP switch

Supported Video Formats

720(1440) x 480i @ 59.94/60, 720(1440) x 576i @ 50
1280 x 720p @ 50, 1280 x 720p @ 59.94/60
1920 x 1080i @ 50, 1920 x 1080i @ 59.94/60
1920 x 1080p @ 23.94/24, 1920 x 1080p @ 25, 1920 x 1080p @ 29.97/30
1920 x 1080p @ 50, 1920 x 1080p @ 59.94/60

Video Inputs:

3G, HD, and SD-SDI (auto-selected), SMPTE-259/272/274/292/296/299/424/425
1x BNC input, 1x BNC loop-through output

Video Outputs:

HDMI v1.3a, 24/30/36 bits per pixel, RGB, 2.25Gbs, SD, HD, 1080p50/60
HDMI Standard Type A connector

Audio Outputs:

HDMI embedded audio, 24 bit, 2 or 8 channels RCA-style analog outputs at -10dBV

BAT-AS (Analog to HD-SDI)

BAT-AS KEY FEATURES:

Auto detection mode (HD/SD)
Component (YPbPr) or Composite (CVBS or S-Video) input
HD/SD-SDI output x1 [BNC 75ohm]
Supports analog stereo audio iutput (Left RCA : White, Right RCA : Red)
Selectable luminance range(0~255/16~235) by DIP switch
Selectable HD/SD color space conversion by DIP switch

Supported Video Formats:

720(1440) x 480i @ 59.94/60, 720(1440) x 576i @ 50
1280 x 720p @ 50, 1280 x 720p @ 59.94/60
1920 x 1080i @ 50, 1920 x 1080i @ 59.94/60
1920 x 1080p @ 23.94/24, 1920 x 1080p @ 25, 1920 x 1080p @ 29.97/30

Video Inputs:

HD Component (YPbPr) or SD Component/Composite/S-Video, 3x BNC
Video Outputs:

SMPTE-259/272/274/292/296/299 HD/SD-SDI with embedded audio outputs, 1 x BNC
Audio Outputs:

2 channels unbalanced, 2x RCA

Video ADC:

12-Bits

Audio ADC:

24-Bits, 48kHz

BAT-SA (HD-SDI to Analog)

BAT-SA KEY FEATURES:

Auto detection mode (HD/SD)
Re-clocked loop-through HD/SD-SDI output [BNC 75 ohm]
Component (YPbPr) or Composite (CVBS and S-Video) output [RCA]
Supports 2 audio channels (1 stereo pairs)
- 48kHz sample rate
- Left RCA: White, Right RCA: Red
Selectable Component (YPbPr) or Composite (CVBS and S-Video) by DIP switch

Supported Video Formats:

720(1440) x 480i @ 59.94/60, 720(1440) x 576i @ 50
1280 x 720p @ 50, 1280 x 720p @ 59.94/60
1920 x 1080i @ 50, 1920 x 1080i @ 59.94/60
1920 x 1080p @ 23.94/24, 1920 x 1080p @ 25, 1920 x 1080p @ 29.97/30

Video Inputs:

HD and SD-SDI (auto-selected), SMPTE-259/272/274/292/296/299/424/425
1x BNC input, 1x BNC loop-through output

Video Outputs:

Selectable Component (YPbPr) or Composite (CVBS and S-Video) by DIP switch
NTSC and PAL support
3x BNC output

Audio Outputs:

2 channels RCA-style analog outputs at -10dBv

CHD 1812

The CHD 1812 is a versatile and compact HDMI to SDI converter with integrated frame synchronizer. It is an ideal solution for any application which requires a fully synchronized SDI input from an external asynchronous HDMI source.

The flexible reference sync input will accept any analog video sync format including SD bi-level sync, black burst, colorbars and tri-level HD sync. The sync input is auto detecting and fully cross lock compatible. For example: An SDTV reference can be used to frequency lock an HD HDMI input. If no reference is present, the converter performs a standard asynchronous HDMI to SDI conversion. A pair of stereo analog inputs can be embedded into any AES channel. Audio inputs can be either professional balanced audio with selectable full scale level, or unbalanced consumer line level audio. By default any audio present in the HDMI stream will be embedded into the SDI output or it can be replaced with the external audio signals.

The module is also compatible with the yelloGUI software package, which provides access to a host of additional internal settings including adjustable video delay for timing purposes.

An SDI fiber output is also provided with a variety of plug in SFP options available.